锤柄芯棒生产线监控系统的设计毕业论文

 2021-04-16 01:04

摘 要

工具锤是工业生产和日常生活使用最为广泛和方便的一种手动工具,其结构是由锤头和锤柄组成。为保证锤柄在使用时的强度和安全性,其内部会装有一根芯棒。作为主要支撑元件的芯棒,通常是将玻璃纤维、树脂等经过加热熔合后添加其他配料,再经冷却、拉伸、定型、截断等步骤后方能成型。

本课题拟设计一套基于工控组态软件MCGS和可编程控制器PLC的锤柄芯棒生产线监控系统,通过机器作业取代传统的人工操作方式,实现由原料熔合到自动切断芯棒的加工过程。在生产过程中,上位机监控系统能够通过自动和手动两种方式控制硬件设备的开关和运行,实时显示芯棒原料加热-搅拌混合-冷却-定型-拉伸-截断-收集全部加工过程;若加工过程中发生故障,会及时声光报警提醒现场工作人员进行检查,确保安全作业;该监控系统采用PLC和组态控制软件相结合,运行稳定连续,操作界面简洁友好,适合于恶劣的工业生产现场,能够大幅度降低人工劳动量,改善工作环境,提高了芯棒生产效率和准确度。

关键词:PLC;MCGS;锤柄芯棒;监控系统

The design of the hammer handles core rod production line monitoring system

ABSTRACT

Tools hammer is the most widely used industrial production and daily life and convenient a manual tool, its structure is composed of hammer and hammer handle. In order to ensure the strength and security of the hammer handle in use, its internal will be equipped with a mandrel. As a main supporting element of the mandrel, which is usually use glass fiber, resin etc. Add other ingredients, after sewing again by cooling, stretching, shapes, such as truncation steps after forming.

This paper intends to design a set of monitoring system based on industrial control configuration software MCGS and programmable controller PLC, which can replace the traditional manual operation mode by machine operation and realize the processing process of raw material fusion to automatic cutting of mandrel. In the process of production, In the production process, the host computer monitoring system can control the hardware and equipment in the automatic and manual way, real-time display mandrel raw material heating - mixing mixing-cooling-stereotypes-stretching-cutting-collecting all the processing process; If a failure occurs in the processing, will sound and light alarm to remind timely on site inspection, to ensure safe operation; The monitoring system controlled by PLC and configuration software, the combination of continuous running stability, friendly operation interface is simple, suitable for industrial production field, can greatly reduce the manual labor, improve the working environment, improve the production efficiency of rods and accuracy.

Key words:PLC;MCGS;Hammer handle mandrel;Monitoring system

目 录

1 概述………………………………………………………………………………………1

1.1 本课题研究的目的及意义………………………………………………………………1

1.2 本课题研究的发展………………………………………………………………………………1

1.3 本课题研究的国内外现状………………………………………………………………………2

1.4 本课题的任务… ………………………………………………………………………………3

2 监控系统的整体研究方案… …………………………………………………………………………4

2.1 监控系统的构成及作用…………………………………………………………………………4

2.2 锤柄芯棒生产线操作流程图……………………………………………………………………4

3锤柄芯棒生产线监控系统中可编程控制器的作用………………………………………………………6

3.1 PLC的基本构成……………………………………………………………………6

3.2 PLC的发展过程与趋势………………………………………………………………………10

3.2.1 PLC的发展过程………………………………………………………………………10

3.2.2 PLC的发展趋势………………………………………………………………………11

3.3 PLC 的主要特点及功能 …………………………………………………………………11

3.3.1 PLC的主要特点…………………………………………………………………… 11

3.3.2 PLC的功能……………………………………………………………………………12

3.4 PLC 型号的选择……………………………………………………………………………13

3.5 PLC I/O接点介绍… … … ……………………………………………………………………14

3.5.1 PLC I/O接点信息种类…………………………………………………………………14

3.5.2 PLC I/O接点的功能及分配……………………………………………………………15

3.6 系统梯形图…………………………………………………………………………………15

4 锤柄芯棒生产线监控系统中组态界面的设计…………………………………………………………17

4.1 组态软件简介………………………………………………………………………………17

4.2 系统组态 ……………………………………………………………………………………18

4.3 监控界面的设计……………………………………………………………………………18

4.3.1 新建工程……………………………………………………………………………18

4.3.2 流程画面的建立……………………………………………………………………18

4.3.3 定义数据对象………………………………………………………………………20

4.3.4 动画连接……………………………………………………………………………21

4.3.5 定义报警……………………………………………………………………………24

4.3.6 报警显示……………………………………………………………………………25

4.3.7 登入系统的加密……………………………………………………………………26

4.3.8 运行策略……………………………………………………………………………26

4.3.9 设备连接……………………………………………………………………………28

5 软硬件的调试 ………………………………………………………………………………………30

5.1 软硬件调试概述…………………………………………………………………………30

5.2 组态画面显示及功能的实现………………………………………………………………30

结论……………………………………………………………………………………………………33

致谢………………………………………………………………………………………………………34

参考文献……………………………………………………………………………………………………35

附录A ………………………………………………………………………………………………37

附录B ………………………………………………………………………………………………40

1 概述

1.1 本课题研究的目的与意义

本课题拟设计一套基于工控组态软件MCGS和可编程控制器PLC的锤柄芯棒生产线监控系统,通过机器作业取代传统的人工操作方式,实现由原料熔合到自动切断芯棒的加工过程。在生产过程中,上位机监控系统能够通过自动和手动两种方式控制硬件设备的开关和运行,实时显示芯棒原料加热-搅拌混合-冷却-定型-拉伸-截断-收集全部加工过程;若加工过程中发生故障,会及时声光报警提醒现场工作人员进行检查,确保安全作业;该监控系统采用PLC和组态控制软件相结合,运行稳定连续,操作界面简洁友好,适合于恶劣的工业生产现场,能够大幅度降低人工劳动量,改善工作环境,提高了芯棒生产效率和准确度。

您需要先支付 80元 才能查看全部内容!立即支付

课题毕业论文、开题报告、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找,优先添加企业微信。